Condensate Pots /Seal Pots manufacturer in Stainless Steel & Alloy Steel

What are Condensate Pot?

Condensate Pot is designed to drain out foreign or residue material from the pipeline thereby guarding critical components of instrumentation system. Generally Steam is passed through Condensation Pot. The condensate residue is drained from the bottom valve connection .Installation can be either vertical or horizontal lines depending on the system requirement. Also condensate pot is used before the pressure transmitters line because temperature of steam is very high so this high temp. Steam directly may damage diaphragm of the pressure transmitter.

They are also known as Seal Pots or Condensing Pot.

Support for Selection?

We provide complete drawing and technical support for all our customers. We give various recommendations on selection of Pipe Schedule , number of ports and plugging, length of the Condensate Pot, choice of materials ,high temperature support …etc

Strong Focus on Certification

All our Condensate Pot come complete with Hydro Pressure Test .We can also provide you following certifications on request like Material Test Certificate by Spectro Analysis or PMI ,Heat Code Traceability Report ,Dye Penetration Test – Non Destruction Testing , Radiography Testing

Select Condensate Pot Design from above add part number below . Example to order Type A port in 1st Specification add FCP150-4N-A

PART No.	P NPT - F	Pressure Rating PSIG	Capacity (Internal Vol.)cm 3±5%	L mm	B mm	T mm
FCP150-4N	1/4”	1800	150	135	50.8	2.5
FCP300-4N	1/4”	1800	300	225	50.8	2.5
FCP400-4N	1/4”	1800	400	290	50.8	2.5
FCP500-4N	1/4”	1800	500	350	50.8	2.5
FCP1000-4N	1/4”	1800	1000	275	88.9	4.6
FCP2250-4N	1/4”	1800	2250	435	120	5.2
FCP3785-4N	1/4”	1800	3785	680	120	5.2
FCP1000-8N	1/2”	1800	1000	275	88.9	4.6
FCP2250-8N	1/2”	1800	2250	435	102	5.2
FCP3785-8N	1/2”	1800	3785	680	102	5.2
FCP1000-12N	3/4”	1800	1000	275	88.9	4.6
FCP2250-12N	3/4”	1800	2250	435	102	5.2
FCP3785-12N	3/4”	1800	3785	680	102	5.2

Criteria for Selection as below . If you have drawing send us that too .

Pipe size 2",3",4",5”,6” and larger size upon request.

Pipe Schedule 40, 80, 160, XX seamless pipe.

Number of Ports 2 ports upto 8 ports , refer to the section above for arrangements

Total Length Pipe length 8",10",12" and larger length upon request.

Material of construction Carbon Steel ASTM A106 ,Carbon Steel ASTM A105, Stainless Steel 316, Stainless Steel 304 Alloy Steel ASTM A335 P11 ,Alloy Steel ASTM A335 P22 ,P91 , Monel 400, Hastelloy C 276 refer to the section below for visuals

Thread Connections NPT as per ANSI B1.20.1,Socket weld as per ANSI B16.11, Butt weld as per ANSI B16.9

We also have Titanium Fittings & Titanium Ferrule Compression Fittings